YOU KNOW WHAT REALLY GRINDS MY GEARS? (NSFW)

Stoned_Catz

hand over the left lung is disrespectful to the Veteran imo

Rex_Capone420

Iv got the inside handle off. Cant get the outside one off. Iv tried pressing the pin to release t but t wont come off. 

Stoned_Catz

tap with a hammer on the inside guts of the mechanism try to hammer it out you wont hurt the door .. if that dont work snap a pic of it let me see it

Stoned_Catz

you might have to hammer it hard or hammer on a screwdriver against the guts from the inside

Stoned_Catz

oh wait did you take apart the side thing that slides in and out you know on the edge of the door

Rex_Capone420

This isnt the one im workinng on. Its the same knob doe. The one im working on has all the screws out of it. This is just the one to my office.

Stoned_Catz

see that thing sticking out on the edge of the door should be two screws holding that together there right there

Stoned_Catz

Stoned_Catz

if the thing on the edge is off and its still tight you got to pop off that chrome round chrome plate to get to more screws

Rex_Capone420

No hudge

Stoned_Catz

you got to get that round plate off inside of the door, either there is like a round like cotter pin pry out with screw driver its proly just stuck there pry at it with a screw driver plate should come off, there might be a kotter key

Stoned_Catz

there is like a round ring there its got a space in it proly pry that out

Stoned_Catz

Stoned_Catz

see where ive circled here there is one on the other side too, get some channel locks get on both these tabs squeeze them pulling them out to release the plate

Stoned_Catz

dude i found it
https://youtu.be/qU1BwoMOFyk

Stoned_Catz

retaining ring dude exept this one screws off it doesnt pop off

Stoned_Catz

get that vid dude?

Stoned_Catz

goddamit u get that dude


fukkit

Rex_Capone420

I see it. Ring wont budge doe 

Stoned_Catz

you got the use needle nosed plyers he said put sum ass into it